Hook Pass Shot Blasting Machine

Hook pass shot blasting cleaning machine is mainly used in large castings, truck compartments, coal mine machinery, construction machinery, construction machinery and other industries.

The working principle of the hook-pass shot blasting machine is: the large workpiece is lifted by two variable frequency speed-regulating electric hoists to quickly reach the cleaning room, and then passes through the shot blasting room slowly. The shot blaster cleans the whole body of the large component, and enters the rear attachment room after shot blasting. In the rear payment room, the uncleared dead corners of the workpiece are manually shot blasted by a shot blasting tank. After cleaning, the two variable frequency speed-regulating electric hoists drive the workpiece to quickly move to the unloading station to unload the material; the small workpiece is lifted by one variable frequency speed-regulating electric hoist to quickly arrive at the cleaning room, and the workpiece autobiography device drives the workpiece to rotate, and the small parts are shot blasted. The electric hoist drives the workpiece to quickly move to the unloading station to unload the material. The dust generated in the entire shot blasting cleaning process is processed by the dust collector and discharged to meet the standards.

The hook track adopts a ring structure, and the electric hoist after unloading quickly returns to the loading level. Using more than 3 groups of electric hoists can realize the loading, shot blasting and unloading assembly lines, improving the effect and efficiency of shot blasting.

Usage: The Q37 series hook pass shot blasting machine is mainly used for surface cleaning and strengthening of steel structural parts, castings, construction machinery parts and other parts.

1. Use a national cantilever centrifugal shot blasting device with large shot blasting volume and high shot speed to improve the cleaning rate and cleaning quality.

2. The three-dimensional simulated projectile diagram and all drawings of the shot blasting machine are drawn using computer-aided design (CAD, SW), and the selection and arrangement of the shot blasting device are more reasonable to ensure that large workpieces are cleaned at one time.

3. Use heavy lifting slings, and the hook has the functions of lifting, running and indoor rotation.

4. High chromium manganese steel plates can be used for protection according to customer requirements, or ultra-wear-resistant bulk alloy protective plates can be used. The service life is greatly improved, and the appearance is beautiful and easy to replace.