Rotary Table Shot Blasting Machine

1. The rotary table shot blasting machine is mainly composed of the chamber body, the rotary table, the transmission system, the separator, the elevator, the blasting device, the shot blasting device, the dust collector, the electronic control system, etc. The shot blasting device arranged on the top of the chamber performs the best direction of the workpiece. When the workpiece is transferred out of the chamber body with the rotary table, the cleaning effect can be directly seen to carry out the next step of work.

2. The blade blade is rotated through the transmission system, and the ball sand is sent to the lower part of the hoist through the flow pipe, and then the hoist is mentioned to the separator for separation. The separated projectiles are used continuously through the blasting pipe and the gate. The projectiles and dust are crushed and then entered other corresponding pipes and into the waste bucket.

3. The transmission mechanism of the rotary table shot blasting machine is driven by the reducer, and the friction drives with the rotary table through a clutch mechanism, so that the rotary table rotates smoothly. When the workpiece is transferred out of the room, it can be used to directly turn and adjust the workpiece to be cleaned; it can also be used to turn the clutch handle at any time according to the different workpiece being cleaned and the difficulty of loading and unloading the workpiece, so that the friction wheel and the rotary table can be separated, that is, the rotary table stops and adjusts the workpiece and then changes the handle position, and the rotary table starts to rotate again.

Rotary table shot blasting machines are mainly suitable for small and medium-sized workpieces. Rotary table shot blasting machines of this specification are suitable for engine connecting rods, crankshafts, gears, diaphragm springs, etc., and are widely used in casting, forging, machinery, and steel industries.